morbid manse

Hello everyone, today I am sharing my October project for the Gypsy Soul Laser Cuts blog. I could not let the month go by without a project befitting the spookiest of holidays. Imagine a foggy, moonless night in Old Salem. Adjacent to the rows of tombstones and monuments stands a historic manse. The door is ajar, why not take a peak... what's inside is absolutely morbid.

I begin with a Gypsy Soul Last Cuts mini house room box. Using an exacto knife, I cut apart wall, roof and divider pieces. As usual, I do a test fit to understand how all the pieces fit together. Then, using acrylic paint, I add paint along all the edges and at areas where pieces join together. This allows me a bit of play when I am cutting and attaching papers into the sections (if a paper cut is slightly off, the gap does not show). The "attic" area is covered completely with the paint. Since I want it too look like an unfinished attic space, I will not be covering any of these surfaces with paper.

When the paint is dry, I assemble the house. Applying a thin line of glue along the edges and tabs, I then secure the pieces in place. Sometimes it helps to clamp the pieces while drying. When the piece is assembled and the glue is dry, it is time to add the details. I begin with the outside of the house.

Using a die that cuts different styles of shingles and shakes, I select a style to use for the main exterior clapboards. I cut rows of siding from blackout kraft cardstock, then lightly sand and ink them to create an aged and weathered appearance. I begin adding the die cut pieces to the house, working from the bottom up so that the shingles can overlap and stagger mimicking traditional siding. Work on row at a time all the way around the three sides before moving onto the row above. 

I have always admired the special details that are found on historic houses. I thought it would be fun to add a section of fish scales in the upper gabled area. Before switching patterns, I add a frieze (trim) board across the rear to transition to the new pattern. When the fishscale shingles are all in place, I add trim boards along the angled edges to finish the look. The roof is completed in the same manor as the exterior walls, but using heavyweight kraft paper inked with distress ink.

Now it is time to finish the interior rooms. I select papers that give the look of historic wallpapers and plaster. Each "room" is finished in a different paper. Measure and cut a square for each rear wall. Then, cut a strip of matching paper that will cover both the side walls and the ceiling. When papers are cut for each room, ink all of the edges with a dark brown or black ink. 

To add an element of authenticity, create "cracks" by tearing into the paper and inking the torn area. You can also create the appearance of leaks within the walls by dripping dark ink down the wall sections.

The "wood" floors of each room are made by cutting pieces of woodgrain embossed paper that's been inked and and painted. All of the papers are attached to the surfaces using collage medium.

In keeping with the undertaker theme, I decide to give each room its own function that would be found in a funeral home. Starting with the attic, I adhere small pieces of hay randomly on the floor where a skeleton lies. The only remains of a long forgotten guest from years ago. 

Located on the second floor is a mourning room,  complete with prayer candles. An area to gather and contemplate lost souls. 

Adjacent is a store room for found objects; misplaced parts and pieces.

The selection room can be found on the first floor. Here you can find items for all your funeral needs- from flowers to urns and caskets. 

The undertaker's office completes the tour.

Two tiny eye hooks are screwed into the gable to secure a hanging sign. The undertaker is open for business, established 1876.

I hope you have enjoyed this haunting holiday make, perhaps you are inspired to create one of your own. If you've run out of time, consider making a house for a different holiday. I can imagine a wonderful Christmas inspired elf's workshop, or an easter egg factory. The possibilities are endless with the GSLC mini house room box.

Thanks so much for stopping by today, I truly appreciate it.

Enjoy these hallowed days.

Ann

xxx 

supplies used:

Gypsy Soul Laser Cuts used: mini house room box 

Distress products: collage medium, inks, paint, blackout kraftstock, 

Tim Holtz Sizzix Alterations: village rooftops Bigz die.halloween mixed media (bats), 3D embossing folder lumber

Ideaology & Ideaology halloween products: paper stash, resin pumpkins, skulls, cameo, mini vials, quote chips, clippings stickers, charlotte, ephemera, snippets, industrial trims (discontinued)

misc. halloween plastic skeleton pieces, stretchy skeleton, dried flowers, pine needles, twine, faux spider web, hot glue gun, hay 

specimen shattered

Next week I will begin decorating the house for Halloween. For me, this is the best part of the holiday. I have a china cabinet in the dining room which I convert into a creepy cabinet of curiosities.  I thought it would be fun to make a piece to add to my curiosities. Using the Gypsy Soul Laser Cuts 6x6 shadowbox as a base, I created the specimen box. Some shards of mica formed the perfect "shattered" enclosure.

As mentioned, I begin with a 6x6 shadowbox kit from GSLC. The eight piece kit arrives flat. It's a good idea to wipe down the edges of each of the sections before getting started, to remove any residue from the laser cutting process. Any soft rag or paper towel will do the trick. Once the edges have been wiped clean, I like to test assemble the piece (without any glue) to familiarize myself with how it all works. This also helps me to formulate a vision for my final piece. 

I coat all the edges of the pieces, as well as areas where dividers are located, with a light coat of dark brown paint. I plan on adding dimensional woodgrain embossed papers to the outside of the box so that it will look as if the box is made of wood. Having the edges painted a dark brown will ensure that the faux finish is more believable. I also like to coat the interior corners with a dark color so that when the decorative paper pieces are attached to the interior, any unintentional gaps do not show.

I set aside the box pieces to dry and begin working on the interior papers. I begin with a piece of scrapbook paper that has subtle markings and appears aged. I add ink and some random script stamping onto the paper to give it even more dimension, this paper will be used to cover the inside base of the box. A coordinating paper is cut into strips that equal the depth of the box. These strips are inked around the edges with the same ink that was used on the background paper. When the painted edges are completely dry, I use glue along tabs and edges and form the box.

I measure each of the box compartments and cut the base papers to fit, making sure to ink any cut edges. I label the backs of the papers with a letter designated for each compartment. Typically, the three smaller sections will all be the same size; however, the designation allows me to know which "specimen" stamp will be used in which compartment. Using a stamp platform and black archival ink, I stamp the selected "specimen" in the center of the cut paper. I also stamp each image onto a piece of clear acetate with black StazOn ink. The acetate images are set aside to dry.

The next step involves creating the faux wood box exterior. Using a 3D embossing folder and some damp mixed media paper, I run the paper through the diecut machine to add the embossed woodgrain texture. These pieces are then inked, painted and coated with various mediums resulting in a true "wood" look. I make sure to incorporate some of the paint color that was used on the base box to ensure that the transitions are seamless. The wood grained papers are cut to size and attached to the box sides and back with collage medium.

With the main images in place for each section, I am able to visualize where I want to add rub-ons  and additional stamped images. I want the compartment to appear as if the base papers were taken straight from journals or documentation related to each specimen. I add date stamps, signatures, numbers and various other markings. When I am satisfied with the look, the papers are secured in place with adhesive. 

When the StazOn ink is completely dry, I turn the stamped acetate pieces over and use alcohol ink to color the images. When dry, I cut out each image, being careful to get as close to the edge as possible without compromising the image. These acetate images are then attached above their respective stamps within the box. I only attach the acetate pieces along the thorax/abdomen. This allows the wings to be folded upward  enhancing the dimensional effect. 

 The final step in the process is adding shards of mica to the exterior edges of the box. I use a strong, clear drying glue along the edges where the mica touches and then add a weight on top while it dries. You can add as much or as little mica as you want to achieve the desired look. I love how the largest piece spans across the compartments, yet still leaves random areas uncovered.

I hope that you have been inspired by this piece to perhaps create your own themed piece, It is always a lot of fun making pieces that can be displayed year after year.

Thank you so much for taking the time to stop by today, I truly appreciate it.

~Ann  

supplies:

Acetate, Distress Archival black soot ink, Distress collage medium matte, Distress inks, Distress paints, Gypsy Soul Laser Cuts:  6x6 Shadowbox, Mica pieces, Mixed Media paper, StazOn black ink, Tim Holtz Ideaology: paper stash, specimen rub-ons, Tim Holtz/Sizzix 3D embossing folder lumber, Tim Holtz/Stampers Anonymous stamps 

treasure troves

Hi everyone, today I am on the Gypsy Soul Laser Cuts blog sharing this set of treasure boxes. I love having places to keep special things. The Gypsy Soul Laser Cuts ATC sized faux book box and hidden drawer book box are the perfect size to tuck your favorite things in. I thought combining these boxes with the arched framed openings would be a special way to highlight some favorite stamp designs.

I always like to do a test fit of my pieces without any finishes or glue, this allows me to plan ahead and better understand how the finished piece will look and which sides will be exposed. I wipe down all the edges with a paper towel to remove any of the residue left from the laser cutting process and then layout and put together each box. Today's post will describe the process used to create the hidden drawer box. I created a detailed blog post on the ATC sized faux book box for GSLC in the past, called "wish keeper". You can find that post here.

Once I have determined how I want the finished pieces to look, I begin selecting papers and, if necessary, creating papers with inks to match the look I am going for. I know I will be using Lynne Perella Stamps as a focal point within the arched framed openings. I plan on using bold bright colors for the images to create the look of stained glass. I create some background papers for the general box coverings from green and gold inks. 

While I allow the inked papers to dry, I add gold to all of the edges of the pieces, this will give the book box a finished look when it is assembled. I find it easiest to add color to the edges before covering the sides with decorative papers. I paint the arched window frames with gold paint at the same time and set aside to dry.

Since the inside of the box will only be seen when the hidden drawer is removed, I coat all the inside surfaces with the gold paint. This smooth finish will allow the drawer to slide in and out smoothly. 

I paint the outer sides of the drawer piece with the gold paint as well.

Since the outsides of the box will be completely covered, I trace the top panel onto my inked paper and cut it to size, then attach it to the chipboard with collage medium. Setting some weights on to while to dries to ensure it remains flat. When the finished top and bottom panels are dry, I assemble the box with glue along the tabs and connecting edges then set aside to dry.

Next I assemble the hidden drawer portion of the box. The inside of the drawer is finished with decorative paper that complements the focal image. This same paper is used along the outside edges of the outer box but has yet to be attached. 

I measure the interior of the drawer and cut the rectangular base piece. Using a permanent glue stick, I attach the paper in place. I then cut strips the height of the drawer sides and secure them into place with glue stick as well. The stamped and colored image in the arched frame is attached to the center of the front panel with collage medium. 

Before inserting the drawer (and attaching the spine piece) I cut strips of the decorative paper to a height that matched the gap between the front and back covers. I measure the length of the strips by holding them into place and using a pencil to mark the distance. These pieces are inked along the exposed edges and then secured using a glue stick.

The final step in assembling the hidden drawer book box is attaching the spine to the hidden drawer. The easiest way to ensure proper alignment is to partially insert the drawer in the book. With the drawer partially open, align the spine so that the bottom edge is rising on the surface that the bottom of the book is resting on. Using collage medium, coat the area that connects the spine and drawer and then clap together until the collage medium is dry. this makes the spine and the drawer a unit. When the spine is pulled away from the "book" the drawer will open. 

For the ATC sized faux book box, I used the small arched window frame to surround my stamped image.

I hope that you have enjoyed today's post. Maybe you are inspired to create your own treasure box or boxes. The Gypsy Soul Laser Cuts chipboard sets are easily altered to any style you desire!

Thank you so much for taking the time to stop by today,

I truly appreciate it.

Be creative every day.

~Ann

 xxx

supplies:

Gypsy Soul Laser Cuts:

arched window frames large, arched window frames small,

 ATC sized faux book box, hidden drawer book box

Bristol paper

Avery glue stick

Ideaology: crinkle ribbon

Charcoal pencil

Micron pen: black

Distress Archival ink: black soot

Distress collage medium: matte

Distress ink re-inkers: 

fired brick, peeled paint, aged mahogany, wilted violet, dusty concord, chipped sapphire, 

blueprint sketch, rusty hinge, fossilized amber, worn lipstick

Daniel Smith gold gesso 

Distress ink spray stain: peeled paint, forest moss

IZink dye spray: gold, spring green, black licorice

Paper Artsy Lynne Perella stamps 

retro recipe journal

I love the simplicity of summer days: outdoor barbecues, picnics, and the lack of scheduled activities and responsibilities. Summer days give us time to relax. Lately, I've noticed a trend in journaling towards junk journals. I thought it would be fun to create a vintage styled "favorite recipe" junk journal, combining the simplicity of vintage style with modern day trends. Today I am on the Gypsy Soul Laser Cuts Blog sharing details for my retro recipe journal.

Gypsy Soul Laser Cuts art journal is the perfect base for this project. It contains sixteen chipboard pieces of varying sizes and textures and two binding rings. All of the pages are punched to accommodate ring style binding. Four of the pieces are "tabbed" perfect for creating different sections, and if you want to add your own pages, 5x7 fits perfectly.

I wanted my journal to have a retro vibe, so I selected a vintage red and white gingham check for the cover, then I added a black stripe along the binding edge. I embossed the favorite recipes title with a black glossy finish and added it along the right side of the cover. Since the cover will receive the most use opening and closing, I added chrome grommets to the punched holes. This will allow the journal to open easily.

Next, I searched for vintage images of recipes and advertisements to include on the front sides of the chipboard pages. I intentionally left the back sides of the pages unfinished to allow for artist freedom when the journal is put to use.

The images were cut out and added to the smaller chipboard pieces that are located in front of the tabbed dividers. On pages where the image was smaller, I incorporated the red and white checked paper, as well as some black paper details.

Each of the tabbed divider pages are covered with a vintage ledger paper. I thought it would be fun to add titles to the tabbed portion, in the keeping with the retro recipe theme. I used label letters to spell out each course, ie. salads, soups, entrees, and deserts.

With the main pages complete, I created some clips that can be used in the journal. For these, I used the Gypsy Soul Laser Cuts kitchen utensils set. I added a coat of black gesso to each side of the pieces. When  the gesso was dry, I attached a paper clip to the back side with strong glue and set aside to dry. The oven mitt piece was covered with gingham and black paper before the clip was attached to one side.

The only thing left to do is cut some of your favorite papers to be added to the journal. I cut a few different types of paper in 5"x7" size then, using the existing page holes as a guide, I marked each page. Using a hole punch, I created the holes and slipped all the pages into the journal where I wanted them. The binding rings make adding and removing pages a breeze.

I think the possibilities for the Gypsy Soul Laser Cuts art journal are endless. You can turn this piece into any style of your liking quickly and easily. The size is perfect for slipping into your bag and taking it with you wherever you go.

Perhaps I've inspired you to create your own journal, I'd love to see your take on this piece.
Thanks so much for taking the time to stop by today,
I really appreciate it.
~Ann
 xxx

supplies used:
black gesso
black embossing powder
found papers and images
1/4" grommets

Gypsy Soul Laser Cuts:

art journal, favorite recipes title, kitchen utensils
paper clips
sookwang double sided adhesive
Tim Holtz Ideaology: label letters
Versamark embossing ink